Door Hangers

On one of our recent tripsLindz and I had a random convoabout the door hangers that you leave on your hotel room when you don’t want to be disturbed.You know- the ones that let the cleaning crew know whether or not to come in. We loved the idea of making our own, but with real requests! Thus the idea for these DIY Door Hangers! We are huge doughnut and pizza fans, but you can personalize them however you like!

DIY Door Hangers

Supplies:

• Wood – 1in x 4in x 8ft Common Board
• Twine
• Circular Saw
• Measuring Tape
• Acrylic Paint
• Paint Brush
• Screw Driver
• 1/2 Inch Screws

Directions:

Step 1: Your going to need wood so get a 1in. x 4in. x 8ft. This will allow you to cut multiple pieces to have as extras.

Step 2: Make a mark every 6 1/2 inches along your board.

Step 3: Using a circular saw, cut each piece along your lines.

Step 4: Sand all of your wood pieces.

Step 5: Paint each block and let dry.

Step 6: Add whatever design you would like or you could use some classics like “Do Not Disturb” or “Room Service Please.” The world is your oyster here, so have fun with it!

Step 7: Add two screws to the back of each block making sure not to screw them all the way in and also make sure it doesn’t go all the way thru.

Step 8: Tie twine around each screw and cut the excess off the ends.

We thought these were a really fun weekend craft. We have even made a few more and added them to our guest welcome cart , so that our guests can pick their favorites when they stay. We would love to see what you come up with, so if you make your own please tag us on Instagram with #OMTcrafts!

Thanks for stopping by!